home *** CD-ROM | disk | FTP | other *** search
- HP JETADMIN UPGRADE FOR WINDOWS« 95 (VERSION 2.11.02)
- 11/26/95
-
- ************************************************
-
- TABLE OF CONTENTS
-
- A. UPGRADE SUMMARY
- B. CONFIGURATION ISSUES
- C. HOW TO OBTAIN THE UPGRADE
- D. HOW TO INSTALL THE UPGRADE
- E. SOFTWARE LICENSE AGREEMENT
- F. TRADEMARKS
-
- ************************************************
-
- A. UPGRADE SUMMARY
-
- This version of HP JetAdmin contains support for the latest printers and plotters
- from HP (LaserJet 5SiMX, 1600CM, etc) This version supersedes previous versions.
-
-
- ************************************************
-
- B. CONFIGURATION ISSUES
-
- HP JetAdmin for Windows 95 requires the Microsoft« IPX/SPX-compatible
- protocol. If you are using HP JetAdmin (NetWare Support), you should be
- running the Microsoft Client for NetWare Networks. The clients listed under
- 'Novell' currently are not compatible with HP JetAdmin software.
-
- ************************************************
-
- C. HOW TO OBTAIN THE UPGRADE
-
- The HP JetAdmin for Windows 95 software (Three disks from three self-extracting zip files:
- ja95_d1.exe,ja95_d2.exe,ja95_d3.exe) can be found
- on the following sources:
-
- * CompuServe: Go HPPER, JetDirect and Network library
- * HP FTP Site: ftp-boi.external.com, /pub/networking/software
- * HP BBS: (208) 344-1691 (14,400 n,8,1) Network Printer Software
- Library (1J)
-
- The software is also available from the HP Driver Distribution Center - call
- (303) 339-7009 to order it.
-
- ************************************************
-
- D. HOW TO INSTALL THE UPGRADE
-
- CREATING THE INSTALL DISKETTES
-
- 1. Copy JA95_D1.EXE to a temporary subdirectory called disk1.
- 2. Unpack the files by typing JA95_D1 at a DOS prompt.
- 3. Copy JA95_D2.EXE to a temporary subdirectory called disk2.
- 4. Unpack the files by typing JA95_D2 at a DOS prompt.
- 5. Copy JA95_D3.EXE to a temporary subdirectory called disk3.
- 6. Unpack the files by typing JA95_D3 at a DOS prompt.
- 7. Remove JA95_D1.EXE, JA95_D2.EXE, JA95_D3.EXE from each of the three subdirectories.
- 8. Copy the files from each directory to a separate floppy disk.
- 9. Verify floppy disk contents.
- 10. Remove temporary subdirectories.
-
-
- Contents of Disk 1:
- HPJAHLP.CNT HPALERTS.DLL HPARRKUI.DLL HPBCOM.DLL HPCOLA.DLL
- HPDMIPX.DLL HPECLUI.DLL HPHCO.DLL HPHCOUI.DLL HPJDCOM.DLL
- HPJDMON.DLL HPJDNP.DLL HPJDPP.DLL HPJDUI.DLL HPJDUND.DLL
- HPHCO.HLP HPJDUND.HLP HPNETPRN.INF
-
- Contents of Disk 2:
- HPPRRUSH.DLL HPJMON.HLP HPJOBS.EXE HPMS.DLL HPMSTOR.HLP
- HPMSUI.DLL HPNETSRV.DLL HPNW416.DLL HPNW432.DLL HPNWPSRV.DLL
- HPNWSHIM.DLL HPOBJ.DLL HPPJL.DLL HPPJLEXT.DLL HPPRARRK.DLL
- HPPRARRK.HLP HPPRECL.DLL HPPRECL.HLP HPPRNTR.DLL HPPRNTR.HLP
- HPPROPTY.EXE HPJMON.DLL HPPRUI.DLL HPRRM.DLL HPRUSHUI.DLL
- HPSNMP.DLL HPTABS.DLL HPTRBIT.DLL HPVBIT.DLL HPWIZ.DLL
- JETADMIN.CPL
-
- Contents of Disk 3:
- HPLOTCP.DLL HPLOTUI.DLL NWCALLS.DLL JETADMIN.EXE HPLOT.HLP
- JETADMIN.HLP
-
-
- Note: You Must Obtain the Windows 95 installation disk(s) to perform this upgrade.
-
-
- ______________________________________________________
-
- Remove Previous Versions of HP JetAdmin:
-
- If you have HP JetAdmin installed on your system, you must remove it
- before you upgrade.
-
- To check if HP JetAdmin is installed on your system, open the 'Network' icon
- in the Control Panel. A list of installed network components is displayed.
- If either 'HP JetAdmin' or 'HP JetAdmin (NetWare Support)' appears in this
- list, remove it by highlighting the appropriate entry in the list and
- selecting the 'Remove' button underneath the list. Selecting 'OK'
- will confirm your choice. You must reboot your system at this time to
- complete the removal process.
-
- This upgrade is English only. If your current HP JetAdmin is not in
- English, installing this upgrade will replace your existing localized
- HP JetAdmin with an English version.
- ______________________________________________________
-
- INSTALLING THE JETADMIN SOFTWARE
-
- 1. Open the 'Network' icon in the Control Panel.
-
- 2. Select the 'Add' button underneath the list of installed network
- components.
-
- 3. Select 'Service' for network component type and select 'Add.'
-
- 4. On the 'Select Network Service' dialog, select the 'Have Disk...' button.
-
- 5. Once the 'Install From Disk' dialog is displayed, enter the path to the
- "A" drive, insert disk1 and select 'OK.'
-
- 6. Choose either 'HP JetAdmin' for direct mode printing or 'HP JetAdmin
- (NetWare Support)' for configuring printers to be used with Novell
- NetWare servers and select OK.
-
- 7. Once you select 'OK' the upgrade process begins.
-
- Most files will be obtained from the three diskettes. However, there are a few
- files that must be copied from the Windows 95 disk(s). If the system cannot
- find a file during the installation, enter the path for the Windows 95 disk(s).
- Once all the files have been copied, you must reboot your system for the upgrade to be
- completed.
-
- ************************************************
-
- E. SOFTWARE LICENSE AGREEMENT
-
- ______________________________________________________
-
- IMPORTANT NOTICE:
-
- Read the license agreement below before installing the HP JetAdmin
- Software for Windows 95 on your computer. The right to use this
- software is sold only on the condition that the customer agrees to the
- following License. If you do not agree to the terms of the License
- Agreement, you may return the unopened package for a full refund.
- However, installing the utilities on your computer indicates your
- acceptance of these terms and conditions.
- ______________________________________________________
-
- * In return for the payment of the one-time fee for the HP JetDirect
- Print Server (Network Interface) the customer receives from
- Hewlett-Packard Company (HP) a license to use this product subject to the
- following terms and conditions.
-
- * No copies of the HP JetAdmin Software for Windows 95 may be
- produced for sale to third parties or for any purpose other than those
- purposes expressly permitted in paragraph 1 above.
-
- * This license and the HP JetAdmin Software for Windows 95 may be
- transferred to a third party only with the prior written consent of
- Hewlett-Packard, provided the third party agrees to all terms of the
- license.
-
- * Agreement and the customer does not retain any copies of the software.
-
- * Purchase of this license does not transfer any right, title or interest
- in the HP JetAdmin Software for Windows 95 to the customer except
- as specifically set forth in this License Agreement.
-
- * Hewlett-Packard reserves the right to terminate this license upon
- breach. In the event of termination, the customer will either return all
- copies of the product to Hewlett-Packard, or with Hewlett-Packard's prior
- written consent, provide Hewlett-Packard a certificate of destruction
- of all copies.
-
- * In the event the customer modifies the HP JetAdmin Software for
- Windows 95 or includes it with any other software program, the customer
- agrees upon termination of the license to either remove the HP JetAdmin
- Software for Windows 95 or any portion thereof from the modified
- program and return it to Hewlett-Packard or provide Hewlett-Packard with
- a certificate of destruction thereof.
-
- ************************************************
-
- F. TRADEMARKS
-
-
- * Microsoft and Windows are registered trademarks of Microsoft in the
- U.S. and other countries.
-
- * Novell and NetWare are registered trademarks of Novell Inc.
-